Netgear GS728TXS GS728TXS/GS752TXS Software Administration Manual - Page 201

GS752TXS and GS728TXS Smart Switches 4. Click Apply. Configuring Management Access From the Access menu, you can configure HTTP and Secure HTTP access to the GS752TXS/GS728TXS management interface. You can also configure Access Control Profiles and Access Rules. The Access tab contains links described in the following sections. • HTTP Configuration • Secure HTTP Configuration • Certificate Management • Certificate Download • Access Control HTTP Configuration Use the HTTP Configuration screen to configure the HTTP server settings on the system.  To configure the HTTP server settings: 1. Select Security > Access > HTTP  HTTP Configuration. 2. Enable or disable the Web Java Mode. This applies to both secure and unsecure HTTP connections. 3. In the HTTP Session Soft Timeout field, specify the number of minutes an HTTP session can be idle before a timeout occurs. After the session is inactive for the configured amount of time, the administrator is automatically logged out and must reenter the password to access the management interface. A value of zero corresponds to an infinite time-out. The valid range is 0 to 60 minutes. The default value is 5 minutes. 4. In the HTTP Session Hard Timeout field, specify the hard time-out for HTTP sessions. This time-out is unaffected by the activity level of the session. The value must be in the range of (0-168) hours. A value of zero corresponds to an infinite time-out. The default value is 24 hours. 201