Palm 500V User Guide - Page 18

2 SETTING UP CHAPTER 2 If the battery is installed, remove it. Slide your finger under the left side of the battery and lift up to remove it. 3 With the metal contacts facing the battery compartment, slide the SIM card into the cutout in the lower-left corner of the compartment until you feel the card click into place. Align the notches to make sure you have the card oriented correctly. Notch Battery contacts Smartphone contacts 5 Slide the battery door back into place. 6 Press and hold Power Palm® logo appears. until the TIP If your smartphone does not turn on after you insert the battery, you need to connect it to the AC charger to charge it (see Charging the battery). If it still doesn't start, perform a soft reset (see Performing a soft reset). 4 Align the metal contacts on the battery with the contacts inside the battery compartment, insert the battery into the compartment at a 45-degree angle, and then press it into place. 7 Follow the onscreen instructions to finish the installation. 8 If your SIM card is not already activated, follow the activation steps provided by your network operator, or contact your network operator directly for assistance. If you plan to use email and web browsing, you need a data service 18 I N S E R T I N G T H E S I M C A R D A N D B A T T E R Y