Palm 700wx User Guide - Page 52

3 YOUR PHONE CHAPTER DID YOU KNOW? When the second call is outgoing, you can conference the two calls, but you cannot swap between them. When the second call is incoming, you can swap between the two calls, but you cannot conference them. TIP When two calls are active and you press Power/End, you hang up both calls. To return to the first call, wait for the person on the second call to hang up. Using Flash mode during an Active call Flash mode is an alternate way to manually manage your calls while one or more calls are active. The preferred methods for managing multiple calls are described in Making a second call, Answering a second call (call waiting), and Making a conference call. But when these methods don't work, you can use Flash mode. This mode is often used during a conference call when one of the calls has ended but the other remains connected. 1 Press Phone/Send from the Active Call screen. 2 Select Send Key (Flash). 3 Press Flash (left action key). Depending on the state of your active call, pressing Flash does one of the following: • If you have one active call, pressing Flash (left action key) puts the call on hold. To take the call off hold, press Flash (left action key) again. • If you have two active calls and at least one of the calls is an incoming call, pressing Flash (left action key) swaps between the two calls. • If you have two active calls and both of the calls are outgoing, pressing Flash (left action key) conferences the two calls. • If you have two calls in conference, pressing Flash (left action key) hangs up the second call. You can then dial another number. 4 Press Power/End to exit Flash mode and end all calls. 44 W H A T C A N I D O D U R I N G A C A L L ?