Philips 50PF9830A User manual - Page 35

English 2496.1 16x24 en 14-12-2005 10:11 Pagina 31 § In case Color has been selected in the Mode menu: • Select Color in the Ambilight menu and press the cursor right. • Select Auto Color and press the cursor right again to select Personal, Warm white, Cool white or Blue. • Select Palette to select the general color of the light. • Select Saturation to adjust the colorfulness of the light. Note: - Adjusting the Palette and/or Saturation settings will set the color mode to Personal. - The selected color mode will be the one used when turning on the ambient lights from standby mode. è In case Ambience, Relaxed, Movie or Action has been selected in the Mode menu: • Select Separation in the Ambilight menu and press the cursor right. • Select Off for a mono behavior which means that all lamps will behave equally. • Select Minimum, Medium or Maximum to define the Ambilight stereo effect over the available lamps. ! Select Balance and use the cursor left/right to adjust and generate any color and level of light intensity on the left and right side of the picture to perfectly match your room setup. Auto Color modes: • Personal: Select any color or hue to match to your personal taste, e.g. your interior, the program content (sports, movie, etc.), the mood you are in, etc. • Warm white:The color is matched to that of most normal lightbulbs. Select this setting if you want the Ambilight to fit best with normal living room lighting. • Cool white:The color is matched to that of normal daylight (6500K). Select this setting if you prefer more cool lighting. Note: the 6500 K is the SMPTE recommended setting for ambient backlighting of displays. • Blue:The blue color is preferred by most consumers to create a cool, modern and /or mystical atmosphere. Select this setting according to your personal taste or mood. Note: Infrared interference on external devices: To avoid bad infrared remote control reception, place your external devices out of sight of the ambient lights of your TV set. Ambilight does not function well when the room temperature is less than 59°F/15°C. 31