Philips DVDR3455H User manual - Page 18

Step 2 : Optional Connections English CABLE SATELLITE ANTENNA A VIDEO (CVBS) EXT 1 TV-OUT ANTENNA-IN EXT 2 S-VIDEO (Y/C) B INPUT OUTPUT VIDEO (CVBS) DVD RECORDER 22F8 PR COMPONENT Y VIDEO L OUT 1 L L R LISTED R Complies with 21 CFR OUT 2 1040.10 and 1040.11 R R AUDIO S-VIDEO (Y/C) COAXIAL PB (DIGITAL AUDIO) OUT 3 AUDIO D E Back of an RF Modulator (Example only) TO TV ANT IN CH3 CH4 VIDEO R L IN AUDIO IN C TV TV has only an antenna input jack Use this connection if your TV has only a single Antenna In jack (or labeled as 75 ohm or RF IN) and does not have any audio/video jacks. For this connection, you need a RF modulator in order to view the disc playback. A You may have an Antenna/Cable TV signal (or from the Cable Box/Satellite Receiver/VCR) connected to your TV's antenna input jack (VHF/UHF RF IN.) Remove it from the TV and connect it to the ANTENNA-IN jack on the recorder. B Use the supplied RF coaxial cable to connect the TV-OUT jack on the recorder to the antenna input jack on the RF modulator. C Use an RF coaxial cable (not supplied) to connect the TO TV jack on the RF modulator to the antenna input jack on your TV. D Use the supplied AV cables (yellow ends) to connect the VIDEO (CVBS) OUT1 jack on the recorder to the video input jack (or labeled as A/V In, Video In, Composite or Baseband) on the RF modulator. E Use the supplied AV cables (red/white ends) to connect the AUDIO L/R OUTPUT jacks on the recorder to the audio input jack (or labeled as AUDIO IN or LINE IN) on the RF modulator. Helpful Hints: - If you have connected the TO TV jack on your RF modulator to your TV, set your TV to channel 3 or 4. - See your electronics retailer for details on RF modulator availability and operations. TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet. 18 1_dvdr3455H_eng_21832.indd 18 2007-06-11 11:23:24 AM