Ricoh AP3800C Maintenance Guide - Page 108
Removing Jammed Staples, Add Staples
View all Ricoh AP3800C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Troubleshooting Removing Jammed Staples When "Add Staples " appears on the panel display, or when the printer does not staple even after it is instructed to, the staples might be jammed. Add Staples C Open the face plate of the car- tridge to unlock it. A Open the front cover for the 2 4 Tray Finisher. The stapler is attached to the posi- ZDJP227J tion shown in the illustration. D Remove the jammed staples. ZDJP216J B Remove the cartridge by pulling the green knob in the direction of the arrow. ZDJP228J E Close the face plate of the car- tridge until it clicks into place. 98 ZDJP217J ZDJP229J
Troubleshooting
98
4
Removing Jammed Staples
When "Add Staples " appears on the
panel display, or when the printer
does not staple even after it is in-
structed to, the staples might be
jammed.
A
Open the front cover for the 2
Tray Finisher.
The stapler is attached to the posi-
tion shown in the illustration.
B
Remove the cartridge by pulling
the green knob in the direction of
the arrow.
C
Open the face plate of the car-
tridge to unlock it.
D
Remove the jammed staples.
E
Close the face plate of the car-
tridge until it clicks into place.
Add Staples
ZDJP216J
ZDJP217J
ZDJP227J
ZDJP228J
ZDJP229J