Ricoh AP3800C Maintenance Guide - Page 32
Please Wait, Press # for, Fuser Adjust, Set Sheet in, Bypass, then, Pull out the Bypass Tray Exten - fuser unit
View all Ricoh AP3800C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Replacing Consumables and Maintenance Kit The following message appears on the panel display, and the printer starts color registration adjustment automatically. Please wait for a 1 while. Calibrating... After finishing adjustment, the following message appears. Initializing... Please Wait S Confirm that the following mes- sage is displayed on the panel display, and then press {Enter}. Press # for Fuser Adjust T Confirm that the following mes- sage is displayed on the panel display, and then load the A3 paper which comes with the Fusing Unit in the Bypass Tray. Set Sheet in Bypass, then # A Open the Bypass Tray. B Pull out the Bypass Tray Extension, and then flip it open. ZDJH203J C Slide the side guides outward (A), and then load paper until it stops (B). ZDJH204J D Adjust the side guides to the paper width. ZDJH205J Important ❒ Be sure to shuffle the paper ZDJH202J before loading the stack onto the tray so multiple sheets are not fed in at one time. 22