Ricoh AP3800C Maintenance Guide - Page 27
Insert the Development Unit, Unit, pull out the tape slowly
View all Ricoh AP3800C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Replacing the Development Unit B Insert the Development Unit along the rail, and push in slowly until it stops. I Lower the inner cover slowly. 1 ZDJH227E C Holding the Development Unit, pull out the tape slowly in a level manner. ZDJH018J J Tighten two screws using provid- ed screwdriver. ZDJH039J Important ❒ Be sure to pull out the tape to avoid printer malfunction during operation. ❒ The removed tape is dirty. Be careful not to let it get in contact with your hands or clothes. ZDJH019J Note ❒ Be sure to return the provided screwdriver to its original position on the inside of the front cover. K Turn the light brown lever clock- wise. ZDJH020E 17
Replacing the Development Unit
17
1
B
Insert the Development Unit
along the rail, and push in
slowly until it stops.
C
Holding
the
Development
Unit, pull out the tape slowly
in a level manner.
Important
❒
Be sure to pull out the tape to
avoid printer malfunction
during operation.
❒
The removed tape is dirty. Be
careful not to let it get in con-
tact with your hands or
clothes.
I
Lower the inner cover slowly.
J
Tighten two screws using provid-
ed screwdriver.
Note
❒
Be sure to return the provided
screwdriver to its original posi-
tion on the inside of the front
cover.
K
Turn the light brown lever clock-
wise.
ZDJH227E
ZDJH039J
ZDJH018J
ZDJH019J
ZDJH020E