Ricoh AP3800C Maintenance Guide - Page 75
Paper Input, Bypass Size, 11 x 17, Confirm that Bypass Size is
View all Ricoh AP3800C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Loading Paper B Slide the side guides outward (A), and then load paper until it stops with the print side up (B). D Set the paper size using the con- trol panel as follows: A Press {Menu}. ZDJH204J C Adjust the side guides to the pa- per width. ZDJH205J Important ❒ Confirm that the top of the stack is not higher than the limit mark inside the tray. ❒ Shuffle the paper before loading the stack onto the tray so multiple sheets are not fed in at one time. 3 ZDJS001J "Menu" appears on the panel display B Press {U} or {T} to "Paper Input" menu, and then press {Enter}. The following message appears on the panel display. Menu: Paper Input C Confirm that "Bypass Size" is displayed, and then press {Enter}. The following message appears on the panel display. Paper Input: Bypass Size D Press {U} or {T} to display the size and direction of the paper in the bypass tray. Bypass Size *11 x 17 After about two seconds, the display is returned to the menu. 65