Ricoh Aficio SP 1200SF User's Guide - Page 65
Connecting an external TAD, Connections
View all Ricoh Aficio SP 1200SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Telephone and external devices Connecting an external TAD 7 You can connect an external Telephone Answering Device (TAD) to the same line as your machine. When the TAD answers a call, your machine will "listen" for the CNG (fax calling) tones sent by a sending fax machine. If it hears them it will take over the call and receive the fax. If it does not hear them, it will let your TAD take a voice message and the display will show Telephone. The external TAD must answer within four rings (we recommend you set it to two rings). This is because your machine cannot hear the CNG tones until the external TAD has picked up the call. The sending machine will send CNG tones for only eight to ten seconds longer. We do not recommend using the toll saver feature on your external TAD if it needs more than four rings to activate it. Note If you have problems receiving faxes, reduce the ring delay setting on your external TAD. Connections 7 You can connect a TAD to your machine as shown in the diagram below in accordance with your country. Type A 7 For the countries such as USA, Canada, Spain, Netherlands, Portugal, Poland, Hungary, Czech, Norway, Asia, Oceania and etc. 1 1 7 1 TAD Note (For USA and Canada) Unless you are using Distinctive Ring, the TAD must be connected to the EXT. jack of the machine. Type B 7 For the countries such as UK, France, Italy, Belgium, Sweden, Denmark and Finland. 1 1 1 TAD 55