Ricoh Aficio SP 3510DN Software Guide - Page 80
Configuring the IPv6 Settings, When disabled, [DHCP], [Manual Configuration Address], [Prefix Length]
View all Ricoh Aficio SP 3510DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
5. Monitoring and Configuring the Printer Configuring the IPv6 Settings Click the [IPv6 Configuration] tab on the network settings page to configure the IPv6 settings. IPv6 Item IPv6 Description Select whether to enable or disable IPv6. You cannot disable IPv6 using Web Image Monitor if the printer is currently in use in an IPv6 environment. In this case, use the control panel to disable [IPv6] under [Network Setting]. When disabled, [DHCP], [Manual Configuration Address], [Prefix Length], and [Gateway Address] below cannot be configured. IPv6 Address Item DHCP IP Address (DHCP) Stateless Address Gateway Address Link-local Address Manual Configuration Address Prefix Length Gateway Address Description Select whether or not the printer obtains its IPv6 address from a DHCP server. Displays the IPv6 address obtained from the DHCP server when [DHCP] is set to [Active]. Displays up to four stateless auto addresses. Displays the printer's default gateway address. Displays the link local address of the printer. The link local address is an address that is valid only inside the local network (local segment). Enter the printer's IPv6 address. Can contain up to 39 characters. Enter the prefix length using a value between 0 and 128. Enter the default gateway's IPv6 address. Can contain up to 39 characters. 78