Samsung ML-2551N User Manual (ENGLISH) - Page 148

Message Memory Overflow Outbin Full Page Too Complex Paper Empty [Size] In [Tray] Ready Close Tray 1 Ready Close Tray 2 Ready Low Toner Ready Replace Cart Status Do this... The printer does not have enough memory to print the current job. The job will be automatically cleared and the printer will return to ready mode. • Expand the memory in your printer. See"Installing Memory DIMM" on page F.3. The output bin is full. It can hold up to 250 sheets of paper. Once the paper is removed from the output bin, the printer resumes printing. Too complicated data was sent to the printer. Simplify the page layout and remove unnecessary graphics from your document. If the message persists, expand the memory in your printer. See "Installing Memory DIMM" on page F.3. The displayed tray is empty. Load the corresponding size of paper into the tray. The Tray1 is open. Close the Tray1 to clear the message. The Tray2 is open. Close the Tray2 to clear the message. The toner cartridge in your printer is nearly Redistribute the toner, referring to page 6.4. 7 empty. The life of some parts on the toner cartridge ends. The overflow of the waste toner contaminates the inside of the machine. Regardless of the remaining toner, this is warning message showing that The toner cartridge replacement is needed as the parts life there of is exhausted. the toner cartridge is at the end of its life and the print quality lowers, You need to replace the cartridge to new one. to continue printing, press On Line/ Continue each time you print a page. SOLVING PROBLEMS 7.21