Samsung ML-2551N User Manual (ENGLISH) - Page 202
Enter, Upper Level, ON Line/Continue, Dynamic Addressing BOOTP/DHCP, Enter a number between 0
UPC - 635753622706
View all Samsung ML-2551N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
11 Press the Enter button ( ) to access the IP Address menu. IP address consists of 4 bytes. Enter a number between 0 and 255 for each byte. 12 Press the scroll button ( or ) to enter a number between 0 and 255 and press the Enter button ( ). 13 Repeat Step 12 to complete the address from the 1st byte to the 4th byte. 14 To select other parameters, such as Subnet Mask or Gateway, press the Upper Level button ( ), then use the scroll button ( or ). Press the Enter button ( ). 15 Repeat steps 12 and 13 to configure the other TCP/IP parameters. 16 Press the ON Line/Continue button ( ) to return to ready mode. Dynamic Addressing (BOOTP/DHCP) To assign the TCP/IP address automatically by the server, take the following steps: 1 In ready mode press the Menu button ( ) until you see "Network" on the bottom line of the display. Press the Enter button ( ) to access the menu. 2 Press the Enter button ( ) when "Config Network" displays on the bottom line. 3 Press the scroll button ( or ) to display "Yes" and press the Enter button ( ). E 4 press the Upper Level button ( ), then use the scroll button ( ). 5 Press the Enter button ( ) when "Config TCP" displays. USING YOUR PRINTER ON A NETWORK E.9