Sennheiser ADN D1 Instructions for Use - Page 103
Open Local Conference Document
View all Sennheiser ADN D1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Using the "Conference Manager" software Loading a configuration ̈ In the menu bar, click "Global Menu" > "Open Conference". The "Open" window appears. If the software is connected to a central unit (see page 100), you can load three types of configurations: Loading a configuration ... ... of an active (running) conference ("Active Conference Document") Actions To load your configuration in "Live"* operating mode: ̈ Select the "Open Active Conference Document from CU" option button. ̈ Click "OK". To select the operating mode ("Setup"** or "Live") in which the configuration is to be loaded: ̈ Select the "Open Conference Document from CU" option button. ̈ Select the configuration of an active conference (marked with an asterisk "*") from the drop-down list. ̈ Select the operating mode ("Setup" or "Live") and click "OK". ... of a non-active conference ("Conference Document") To select the operating mode ("Setup" or "Live") in which the configuration is to be loaded: ̈ Select the "Open Conference Document from CU" option button. ̈ Select the configuration of a non-active conference (not marked with an asterisk "*") from the drop-down list). ̈ Select the operating mode ("Setup" or "Live") and click "OK". ... of a conference saved locally ̈ Select the "Open Local Conference Document" on the hard disk ("Open Local option button. Conference Document")*** ̈ Click "OK" and select the desired configura- tion from the "Open Conference" file selection dialog box (file extension "*.adn"). ̈ Click "OK". The conference is loaded in "Setup" operating mode. * After loading a configuration, the conference automatically starts in "Live" operating mode. Also observe the information on page 103. ** In "Setup" operating mode, you can adapt existing configurations to your needs. *** Only available if you are using the Windows version of the software - even if there is no connection to a central unit If you open a configuration in "Setup" operating mode, the password set will be prompted (where applies) (see page 98). 102 | ADN Digital Conference System