Sennheiser ADN D1 Instructions for Use - Page 130

Using the "Conference Manager" software ᕢ ᕨ This setting affects your conference as follows (example): "Talk Time Limit" (speaking time limit) 15 (minutes) "Premonition Time Limit" 60 (seconds) (advance warning time) Effect 60 seconds before the speaking time limit expires, i.e. after 14 minutes in this example, the signal light ring · and the microphone LED º start flashing red. To determine the behavior when the individual speaking time is exceeded: ̈ Tick/untick the "Switch off Microphone on Talktime Exceed" check box. Check box is ticked is unticked Behavior of the conference unit when the individual speaking time is exceeded The individual speaking time is terminated. The signal light ring · and the microphone LED º go off. The individual speaking time is continued. The signal light ring · and the microphone LED º flash red until the speaker has finished speaking. Setting the function of the "All Micros OFF" button The "Clear Request List on Cancel" check box allows you to set the function of the "All Micros OFF" button (see page 139). ̈ Tick/untick the "Clear Request List on Cancel" check box in the "Conference Settings" window. Check box is ticked Function of the "All Micros OFF" button Deactivates all delegate units and clears a request-tospeak list (if available). is unticked Deactivates all currently active delegate units. All requests to speak are retained. Locking/unlocking the central unit's operating menu To protect the central unit's operating menu against any accidental change of settings: ̈ In the "Conference Settings" window, select the "Locked" option button behind "CU Lock Status". The central unit's operating menu is locked. To adjust settings via the operating menu, you have to deactivate the lock mode (see page 44). To deactivate the lock mode: ̈ Select the "Unlocked" option button behind "CU Lock Status". The central unit's operating menu is unlocked. ADN Digital Conference System | 129