Sennheiser ADN D1 Instructions for Use - Page 40
Connecting external audio devices to the central unit
View all Sennheiser ADN D1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Putting the conference system into operation IN -- AUDIO -- OUT PORT II PORT I 2x 52.8V 1.75A 7 Connecting external audio devices to the central unit You can use different settings for processing the audio signals of the IN audio input and the OUT audio output in order to avoid, for example, delayed or double audio signals in videoconferencing or teleconferencing systems (see page 58 or page 131). To output the floor channel via an external audio device: ̈ Use an XLR cable to connect the OUT audio output 7 of the central unit to an external audio device. IN -- AUDIO -- OUT PORT II PORT I 2x 52.8V 1.75A 6 To connect an external audio source and to feed its signals to the floor channel: ̈ Use an XLR cable to connect the external audio source to the IN audio input 6 of the central unit. Connecting a USB mass storage device for audio recordings to the central unit In order to be able to use the audio recording function of the ADN CU1 central unit (see page 77), you require a USB mass storage device with the following characteristics: USB mass storage device Recommended memory size File system Partition Connection Interface Power supply Requirements > 500 GB NTFS FAT32 1 USB type A plug USB 2.0 via USB socket (approx. 500 mA) or separate mains unit ADN Digital Conference System | 39