Sennheiser ADN D1 Instructions for Use - Page 128
Chairperson units, Possible Microphone Limit values
View all Sennheiser ADN D1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Using the "Conference Manager" software Situation Event Behavior The maximum number of speakers who can take the floor simultaneously ("Microphone Limit") has been reached. A further speaker presses the microphone key on his or her conference unit. In "Direct Access" mode: The speaker has to wait until one of the current speakers passes on or loses his or her speaking privileges. He or she is then automatically granted speaking privileges. In "Override" mode: The speaker can take the floor immediately. The speaker with the longest speaking time loses his or her speaking privileges. • "Push To Talk" mode: This conference mode does not require the use of a chairperson unit. If the maximum number of speakers who can take the floor simultaneously ("Microphone Limit") has not been reached, any speaker can take the floor immediately as soon as he or she presses and holds the microphone key. Releasing the microphone key will discontinue the speaking privileges. Situation Event Behavior The maximum number of speakers who can take the floor simultaneously ("Microphone Limit") has been reached. A further speaker presses and holds the microphone key on his or her conference unit. Pressing and holding the microphone key causes no reaction. The speaker can only take the floor if the maximum number of speakers who can take the floor simultaneously drops below the specified limit value. • "Request" mode: For this mode to function, a chairperson unit is required or the conference system must be controlled via the "Conference Manager" software. In "Request" mode, the chairperson receives requests to speak and grants speaking privileges according to the FIFO principle (First In - First Out), i.e. the speaker with the longest waiting time is granted speaking privileges. Situation Event Behavior The maximum number of requests to speak has been reached ("Request Limit"). A further speaker makes a request to speak. The speaker can only make a request to speak if the maximum number of requests to speak drops below the specified limit value. Setting the max. number of speakers who can take the floor simultaneously The "Microphone Limit" menu item allows you to set the max. number of speakers who can take the floor simultaneously for all conference modes. Please note that any connected ADN C1 chairperson unit is counted against the microphone limit (the number of chairperson units is limited to 10 max.). If you set a higher value (adjustment range "1" ... "10") than the one determined by the number of connected chairperson units, the system will reduce the microphone limit to the maximum possible value (see examples in the table). Chairperson units 0 4 10 Possible "Microphone Limit" values "1" - "10" "1" - "6" "0" For information on how this setting affects your conference, refer to the previous section "Adjusting the conference mode". Adjustment range: "1" ... "10" ADN Digital Conference System | 127