Sennheiser ADN D1 Instructions for Use - Page 32
ADN CU1, ADN PS
View all Sennheiser ADN D1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Putting the conference system into operation Connecting ADN PS power supplies to the ADN CU1 central unit For conference systems comprising more than 40 conference units or when the conference units are connected in a redundant ring topology, you require ADN PS power supplies. A max. of 15 ADN PS power supplies can be used in a conference system. ̈ Use a system cable to connect the PORT II socket 8 or PORT I socket 9 of the ADN CU1 central unit to the DATA CU/PS input socket < of the first ADN PS power supply (shorter cables increase the operational reliability, the maximum length allowed is 80 m). ̈ Use a system cable to connect the DATA PS output socket A of the first ADN PS power supply to the DATA CU/PS input socket < of the second ADN PS power supply. ̈ Repeat these steps for the remaining ADN PS power supplies. ADN CU1 ADN PS IN -- AUDIO -- OUT PORT II PORT I 2x 52.8V 1.75A 89 PORT II PORT I 100-240V~ 50/60Hz 240W PORT I 1 2 PORT II 1 2 DATA CU/PS PS PORT I & PORT II: max. 5.25A sum DATA CU/PS PS