Sennheiser ADN D1 Instructions for Use - Page 129

Using the "Conference Manager" software ̈ Enter the max. number of speakers who can take the floor simultaneously into the "Microphone Limit" field. Setting the maximum number of requests to speak The setting adjusted in the "Request Limit" field becomes effective only if you are using a chairperson unit ("Request" mode) or if you have selected "Direct Access" mode. For information on how this setting affects your conference, refer to the section "Adjusting the conference mode" (see page 126). Adjustment range: "0" ... "10" ̈ Enter the max. number of requests to speak into the "Request Limit" field. Activating/deactivating the flashing of the signal light ring · when a request to speak is made ᕢ ̈ Tick/untick the "Blink on Request" check box. Check box is ticked is unticked Behavior when a request to speak is made When a participant makes a request to speak, the microphone LED º flashes green and the signal light ring · flashes red. When a participant makes a request to speak, the microphone LED º flashes green. ᕨ Activating/deactivating the speaking time limit The "Talk Time Limitation" check box allows you to activate/deactivate the speaking time limit. The duration of the speaking time limit, the advance warning time, and the activation of an optical warning signal can be set individually. If you make a new request to speak, the speaking time countdown is started again. ̈ Tick/untick the "Talk Time Limitation" check box. Check box is ticked Behavior The speaking time is limited to the time period set. is unticked The speaking time is not limited. To set the speaking time limit: ̈ Enter the speaking time into the "Talk Time Limit" field. Adjustment range: "1" ... "60", adjustable in steps of 1 minute To set the advance warning time: ̈ Select the desired advance warning time from the "Premonition Time" drop- down list. Adjustment range: "00" ... "120", adjustable in steps of 10 seconds 128 | ADN Digital Conference System