Sennheiser ADN D1 Instructions for Use - Page 31
ADN CU1, ADN D1/ADN C1, Setting up a small conference system with only the central unit
View all Sennheiser ADN D1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Putting the conference system into operation Setting up a small conference system with only the central unit For a small conference system, you do not require ADN PS power supplies. Connecting conference units connected in a cable string to the ADN CU1 central unit The following describes how to connect one cable string to the ADN CU1 central unit. If necessary, repeat these steps for a second cable string. ̈ Use a system cable to connect the PORT II socket 8 or PORT I socket 9 of the ADN CU1 central unit to the IN socket µ of the first conference unit. ̈ Use a system cable to connect the OUT socket ¸ of the first conference unit to the IN socket µ of the second conference unit. ̈ Repeat these steps for additional conference units. ̈ If necessary, repeat all steps for a second cable string. ADN CU1 ADN D1/ADN C1 IN -- AUDIO -- OUT PORT II PORT I 2x 52.8V 1.75A 89 PORT II PORT I 100-240V~ 50/60Hz 240W IN OUT µ¸ IN OUT IN OUT ADN CU1 PORT II PORT I IN OUT 1 IN OUT 2 IN OUT ... 20 IN OUT 1 IN OUT 2 IN OUT ... 20 Please note that there is a limited number of approx. 15-20 conference units per cable string due to the voltage drop on the cable string (see page 15). 30 | ADN Digital Conference System