Sennheiser ADN D1 Instructions for Use - Page 76
ADN Digital Conference System, Running a conference, The conference system behaves as set.
View all Sennheiser ADN D1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Running a conference ᕢ Depending on the setting adjusted in the operating menu (see page 54): • the microphone LED º flashes green and the signal light ring · flashes red or • only the microphone LED º flashes green ᕨ To grant speaking privileges to the next participant from the request-to-speak list: ̈ Press the Next key ´. The next participant from the request-to-speak list is granted speaking privileges. If you are using the "Conference Manager" software, you can also grant speaking privileges with a mouse click (see page 137). ᕥ Ending a conference or withdrawing speaking privileges (cancel function) Depending on the setting adjusted in the operating menu (see page 54): • All LEDs go off and the delegate units are deactivated. A request-to-speak list, if available, is cleared. • All currently active delegate units are deactivated. All requests to speak are retained. ̈ Briefly press the priority key ¿. The conference system behaves as set. If you are using the "Conference Manager" software, you can also deactivate all delegate units with a mouse click (see page 133). ᕤ Muting all delegate units temporarily (priority function) Using the priority function, the chairperson can interrupt a discussion at any time. The speaking privileges of all chairperson units remain active at any time. ADN Digital Conference System | 75