Sennheiser ADN D1 Instructions for Use - Page 27
supply to ensure that the heated air can dissipate., When connecting to the mains power supply
View all Sennheiser ADN D1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Putting the conference system into operation 15 100 - 240V 50/60Hz 385W C If you want to mount the ADN PS power supply into a 19" rack: CAUTION Danger of material damage and personal injury when rack mounting the central unit! When installing the product in a closed or multi-rack assembly, please consider that, during operation, • the ambient temperature within the rack may drastically increase, • high mechanical loading may be exerted on e.g. the housings or cables, • intrinsically harmless leakage currents of the individual mains units may accumulate, thereby exceeding the allowable limit value. This can cause material damage and electric shocks. ̈ Make sure that the mechanical loading of the rack is even. ̈ Make sure that the ambient temperature within the rack does not exceed the permissible temperature limit specified in the specifications (see page 156). Ensure sufficient ventilation; if necessary, provide additional ventilation. ̈ Provide for a duct or vent space of 1 U above the ADN PS power supply to ensure that the heated air can dissipate. ̈ When connecting to the mains power supply, observe the information indicated on the type plate. Avoid circuit overloading. If necessary, provide overcurrent protection. ̈ Ground the rack via an additional ground connection. ̈ Slide the ADN PS power supply into the 19" rack. ̈ Secure the rack mount "ears" to the rack. An engineering drawing detailing the dimensions of the ADN PS power supply can be found in the appendix (see page 158). Connecting the ADN PS power supply to the mains power supply CAUTION Product damage due to unsuitable mains cables or power outlets! An unsuitable power supply can damage the product. ̈ Use the mains cable (supplied) for connecting the product to the mains power supply. ̈ Only use multi-outlet power strips or extension cables with protective ground contacts. ̈ Only use mains cables with a 3-pin connector. ̈ First connect the mains cable (supplied) to the mains socket C. ̈ Connect the mains cable to the mains power supply. The ADN PS power supply is now ready for operation. 26 | ADN Digital Conference System