Sennheiser ADN D1 Instructions for Use - Page 25
Putting the conference system into operation, ADN Digital Conference System, Fastening the optional
View all Sennheiser ADN D1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Putting the conference system into operation Fastening the optional rack mount "ears" ̈ Unscrew and remove the 2 torx screws (T25) on each side of the central unit (see left-hand diagram). ̈ Secure the optional rack mount "ears" U (see "Accessories" on page 154) to the sides of the central unit using the previously removed torx screws (see right-hand diagram). U U 15 100-240V~ 50/60Hz 240W D ̈ Slide the central unit with the mounted rack mount "ears" into the 19" rack and support the weight with e.g. a rack tray. ̈ Secure the rack mount "ears" to the rack. An engineering drawing detailing the dimensions of the central unit can be found in the appendix (see page 157). Connecting the central unit to the mains power supply CAUTION Product damage due to unsuitable mains cables or power outlets! An unsuitable power supply can damage the product. ̈ Use the mains cable (supplied) for connecting the product to the mains power supply. ̈ Only use multi-outlet power strips or extension cables with protective ground contacts. ̈ Only use mains cables with a 3-pin connector. ̈ First connect the mains cable (supplied) to the mains socket D. ̈ Connect the mains cable to the mains power supply. The ADN CU1 central unit is now ready for operation. 24 | ADN Digital Conference System