Sennheiser ADN D1 Instructions for Use - Page 60
Checking the system and detecting problems – “System Menu”, ADN PS
View all Sennheiser ADN D1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Configuring the conference system via the central unit Submenu "Conference Recording" Menu item Function "Record" Activates/deactivates the recording of the conference on a USB mass storage device "Recording status" Provides information on the status of the recording and on the available memory space on the USB mass storage device Main Menu Audio Menu Conference Recording Select and call up the "Conference Recording" submenu Conference Recording Record Recording status Off Select and call up the "Record" menu item Record On Off Off Select the desired setting; store the setting Possible settings: "On" and "Off" Main Menu Audio Menu Conference Recording Select and call up the "Conference Recording" submenu Conference Recording Record Recording status Select and call up the "Recording status" menu item Recording status Status : Off Free Space avail.: 234 GB Off View the information; exit the menu item ADN PS 34 Checking the system and detecting problems - "System Menu" The "System Menu" submenu provides information on the current status of your conference system and any errors that have occured. After switch-on, the central unit automatically performs a self-test. If errors are detected during the self-test, the error icons K to N indicate the type of error encountered. When the error icons M and N appear, and severe errors have occured, the display panel changes from orange to red. If severe cabling errors are detected during the self-test, an error message appears, the display panel lights up red and the conference system is not operational. For more information on severe cabling errors, refer to page 36. The central unit also checks the conference system for errors during a running conference and, if necessary, shows the following icons to indicate these errors. Direct Access 30 Units Icon 22 Meaning Warning triangle Short-circuit icon Cable fault icon NM L K Structural change icon When the error icons M and N appear and the error concerns the PORT socket of an ADN PS power supply, the PORT status LED 3 or 4 of the affected ADN PS flashes orange. ADN Digital Conference System | 59