Sennheiser ADN D1 Instructions for Use - Page 68

Configuring the conference system via the central unit Performing a manual self-test - "Start Self-Test" Main Menu System Menu Diagnostics Select and call up the "Diagnostics" submenu Diagnostics Temperature Bus Statistics Start Self-Test No Select and call up the "Start Self-Test" menu item Start Self-Test Yes No Start Self-Test No Select the desired setting; apply the setting If the ADN CU1 central unit detects errors after switch-on or during operation: ̈ Eliminate these errors (see page 59 and following). ̈ Perform a manual self-test by selecting "Yes" in the "Start Self-Test" menu item. The conference is interrupted. The central unit now checks if a reported error still persists. If the error is eliminated, the corresponding error icon goes off after the self-test. If the error icon is still displayed, you have to take further steps to eliminate the error (see page 59 and following). Always perform the self-test after you have eliminated the reported errors. During the self-test, do not press any keys or buttons and do not change the set up of the conference system. Resetting the error counter - "Reset Break Indication" Main Menu System Menu Diagnostics Select and call up the "Diagnostics" submenu Diagnostics Bus Statistics Start Self Test Reset Break Indication Select and call up the "Reset Break Indication" menu item Reset Break Indication Yes No Select the desired setting; apply the setting Possible settings: "Yes" and "No" This menu item allows you to reset the error counter ("Break Count") in the "Bus Statistic" menu item (see page 66). Resetting the display of data bus errors - "Reset Error Indication" Main Menu System Menu Diagnostics Select and call up the "Diagnostics" submenu Diagnostics Start Self Test Reset Break indication Reset Error Indication Select and call up the "Reset Break Indication" menu item Reset Error Indication Yes No Select the desired setting; apply the setting Possible settings: "Yes" and "No" This menu item allows you to manually reset the display of data bus errors ("Error Indication") in the "Bus Statistic" menu item to default (see page 66). We strongly recommend to always perform a self-test (see page 67) to make sure that the error is eliminated. After a successful self-test, the error icons go off and the display of data bus errors is automatically reset to default. Displaying the hardware and software version - "Versions" submenu Main Menu Conference Menu Audio Menu System Menu Select and call up the "System Menu" submenu System Ports Diagnostics Versions No Select and call up the "Versions" submenu Versions Hardware Version Info Software Version Info No The "Versions" submenu appears The "Versions" menu item provides information on your hardware and software versions. ADN Digital Conference System | 67