Sennheiser ADN D1 Instructions for Use - Page 104

Using the "Conference Manager" software Activating/deactivating automatic loading of a configuration To automatically load a saved configuration at startup of the conference system: ̈ In the menu bar, click "Global Menu" > "Autoload". The "Autoload Properties" window appears. ̈ Establish a connection to the central unit (see page 100). ̈ Select the "Enable Autoload" option button. ̈ Select the desired configuration from the drop-down list. ̈ Click "OK". At the next startup of the conference system, the selected configuration is automatically loaded in "Live" operating mode. To deactivate automatic loading of a configuration: ̈ Select the "Disable Autoload" option button. ̈ Click "OK". Saving a configuration You can save any number of configurations on either the central unit or locally on the connected Windows PC. To save a newly created configuration on the central unit: ̈ In the menu bar, click "Global Menu" > "Save". The "Save Conference" window appears. ̈ If necessary, establish a connection to the central unit (see page 100). ̈ Select the "Save Conference Document on CU" option button. ̈ Enter a file name into the drop-down list box. ̈ Click "OK". The file is saved on the central unit. You can click "Global Menu" > "Save" to save a configuration that already has a file name; there is no further query. Settings made in "Live" operating mode or via the central unit's operating menu are immediately saved to the current configuration. To protect your configuration, we recommend that you save it under a different file name before changing to "Live" operating mode: ̈ Make sure that the software is connected to the central unit (see page 100). ̈ Load the active configuration in "Setup" operating mode (marked with an asterisk "*", see page 102). This configuration contains the last settings used. ̈ Save the configuration under a different file name (see above). ADN Digital Conference System | 103