Sennheiser ADN D1 Instructions for Use - Page 74
Operating a delegate unit, ADN Digital Conference System, Running a conference
View all Sennheiser ADN D1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Running a conference · º ¶ Operating a delegate unit Taking the floor/Making a request to speak Depending on the conference mode set (see page 50), you can • take the floor immediately or • make a request to speak. You then have to wait until the chairperson activates your microphone. If the conference mode is set so that you can take the floor immediately ("Direct Access" mode (factory default setting) or "Override" mode, see page 50): ̈ Press the microphone key ¶. Your microphone is activated and you can take the floor immediately. The microphone LED º and the signal light ring · light up red. The loudspeaker ¾ is muted. Depending on the conference mode and the microphone limit set, the microphone of the previous speaker will be deactivated. If the conference mode is set so that you can take the floor immediately ("Push To Talk" mode, see page 50): ̈ Press the microphone key ¶ and keep it pressed for the duration of your contribution. Your microphone is activated and you can take the floor immediately. The microphone LED º and the signal light ring · light up red. The loudspeaker ¾ is muted. If the conference mode is set so that you first have to make a request to speak ("Request" mode, see page 50): ̈ Press the microphone key ¶. Your request to speak is added to the request-to-speak list. Depending on the setting adjusted in the operating menu (see page 54): - the microphone LED º flashes green and the signal light ring · flashes red or - only the microphone LED º flashes green. When the chairperson grants you speaking privileges, your microphone is activated. The microphone LED º and the signal light ring · light up red. The loudspeaker ¾ is muted. Depending on the conference mode and the microphone limit set, the microphone of the previous speaker will be deactivated. With a chairperson unit, you can take the floor at any time, without first having to be granted speaking privileges. If you are using delegate units only, you can only choose conference modes where speaking privileges do not have to be granted by a chairperson ("Direct Access", "Override" or "Push To Talk" mode, see page 50). Alternatively, you can use the "Conference Manager" software to control the delegate units (see page 133). Deactivating the microphone/Cancelling a request to speak To deactivate the microphone when you have finished speaking or to cancel a request to speak ("Direct Access", "Override" or "Request" mode): ̈ Press the microphone key ¶ once more. The microphone LED º and the signal light ring · go off. In "Push To Talk" mode: ̈ Release the pressed microphone key ¶. The microphone LED º and the signal light ring · go off. ADN Digital Conference System | 73