Sony DVWM2000 Product Manual (Operation Manual 1st Edition (Revised 6)) - Page 100

8-81 -3OveUrviMewIDof OUMuIDtpFuuntcatinonds Display This section explains how to output and display UMIDs. 8-3-1 UMID Output Settings You can choose whether or not to output UMIDs superimposed on SDI signals, and select either Basic UMID or Extended UMID when you choose to output UMIDs. Make these settings using setup menu item 651 UMID OUTPUT. See page 12-18 for more information about setup menu item 651. 8-3-2 UMID Display During recording and playback, UMID data appears in the menu display section of the control panel and on the video monitor. To display the UMID In function menu page 5, press the F2 (UMID) button. See Section 11-1-2 "Using the Function Menu" (page 11-2) for more information about function menu operations. The UMID appears in the menu display section of the control panel and on the video monitor. First item in UMID displayed in menu display section UMI INSTANCE 24PRS XX-XX-XX D HOME F1 F2 F3 F4 EXIT F5 F6 See the next section "UMID display on the video monitor" for examples of the UMID displayed on the video monitor. To switch the displayed UMID item in the menu display section Rotate the MULTI CONTROL knob. To exit from UMID display Press the F6 (EXIT) button. UMID display on the video monitor The video monitor connected to the COMPOSITE VIDEO OUTPUT 3(SUPER) connector or the SDI OUTPUT 3(SUPER) connector on the connector panel displays all UMID items at once. The display of each line is explained below. UMID INFORMATION INSTANCE 24PRS XX-XX-XX 1 MATERIAL IEEE 1394 ZONE 2 XX-XX-XX-XX-XX-XX-XX-XX 3 XX-XX-XX-XX-XX-XX-XX-XX DATE/TIME 20XX/XX/XX XX:XX:XX:XX +XX:XX 4 ALTITUDE XXXXXXXXm 5 LONGITUDE EXXX XX'XX.XX 6 LATITUDE SXXX XX'XX.XX 7 ORGANIZATION XXXX 8 USER XXXX COUNTRY XXXX 9 1 Instance Number generation method and Instance Number The generation method is displayed as follows. CP+16: "16-bit PRS (pseudo-random sequence) +Copy No." method 24PRS: 24-bit PRS method others: Other than the above 2 Material Number generation method SMPTE: SMPTE method IEEE 1394 ZONE: IEEE 1394 ZONE method IEEE 1394 RND: IEEE 1394 RND method others: Other than the above 3 Material Number The material number is displayed in hexadecimal across two lines. The following items, 4 through 9, are contained in the Source Pack. 4 Date/Time Date/Time data is displayed across two lines. The upper line shows the MJD (Modified Julian Date) contained in the Source Pack, converted to UTC. The lower line shows the data in unit count format (hours : minutes : seconds : frame) converted to UTC. Chapter 8 UMID Functions 8-4 Chapter 8 UMID Functions