Sony DVWM2000 Product Manual (Operation Manual 1st Edition (Revised 6)) - Page 117
Changing menu item setting values, To display a desired sub-item
View all Sony DVWM2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Chapter 12 Setup Menus To display a desired sub-item For a menu item having sub-items, you can select a desired sub-item as follows. 1 With a desired menu item selected, press the F2 (SELECT) button. The currently selected sub-item name flashes. 2 Turn the MULTI CONTROL knob to select a desired sub-item. Changing menu item setting values The procedures for changing menu item setting values or sub-item setting values are described below. To change the settings of menu items without sub-items After selecting a desired menu item using the procedure described in the section "Displaying a desired menu item" on page 12-2 and with the menu item number flashing, proceed as follows. 1 Press the F2 (SELECT) button. The current setting of the menu item flashes. 2 Press the F3 (-) button or F4 (+) button, or turn the MULTI CONTROL knob to select a desired setting value. To select another menu item and change its setting value Press the F1 (RETURN) button making the current menu item number flash, then perform the procedures for selecting a desired menu item and changing its setting value. 3 When all required changes have been made, press the F5 (SET) button. This makes the new settings effective. To abandon making changes and exit from the setup menu display Press the F6 (EXIT) button. To change the settings of menu items with sub-items When a selected menu item has sub-items, select a desired sub-item using the procedure described in the section "To display a desired sub-item" on this page making the sub-item name flash, then proceed as follows. 1 Press the F2 (SELECT) button. The current setting of the sub-item flashes. 2 Press the F3 (-) button or F4 (+) button, or turn the MULTI CONTROL knob to select a desired setting value. To select another sub-item and change its setting value Press the F1 (RETURN) button making the current sub-item name flash, then perform the procedures for selecting a desired sub-item and changing its setting value. To select another menu item and change its setting value Press the F1 (RETURN) button twice in succession making the current menu item number flash, then perform the procedures for selecting a desired menu item and changing its setting value. 3 When all required changes have been made, press the F5 (SET) button. This makes the new settings effective. To abandon making changes and exit from the setup menu display Press the F6 (EXIT) button. 12-3 Chapter 12 Setup Menus