Sony DVWM2000 Product Manual (Operation Manual 1st Edition (Revised 6)) - Page 55
Playback in variable speed mode, Playback using the capstan override, function, Digital Betacam
View all Sony DVWM2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 4 Recording and Playback To alternate between normal-speed playback and shuttle mode playback Set the search dial to the position corresponding to the desired shuttle playback speed, then switch between normal-speed playback and shuttle playback by pressing the PLAY and SHUTTLE buttons alternately. For intermittent shuttle mode playback, press the STOP and SHUTTLE buttons alternately. To alternate between normal-speed playback and variable speed mode playback Set the search dial to the position corresponding to the desired variable playback speed, then switch between normal-speed playback and variable speed playback by pressing the PLAY and VAR buttons alternately. For intermittent variable speed mode playback, press the STOP and VAR buttons alternately. Playback in variable speed mode In variable speed mode, you can finely control (51 steps) the playback speed in the following speed ranges depending on the tape format. Digital Betacam: -1 to +3 times normal speed MPEG IMX: -1 to +3 times normal speed Betacam SX: -1 to +2 times normal speed Betacam/Betacam SP: -1 to +3 times normal speed There are detents on the search dial at the still position and at ±1 times normal speed. To carry out playback in variable speed mode, use the following procedure. Z Playback using the capstan override function You can use the capstan override function to adjust the playback speed temporarily. This function is convenient for playback phase synchronization with another VTR playing back the same program. Two types of playback operation are available using the capstan override function (capstan override playback). To perform temporal capstan override playback Z 1 3 2,3 1 Press the VAR button, turning it on. 2 Turn the search dial to the desired angle corresponding to the desired playback speed. Playback in variable speed mode starts. 3 To stop playback in variable speed mode, return the search dial to the center position, or press the STOP button. To return to normal-speed playback Press the PLAY button. 1(B) 2 1(A) 1 (A) Hold down the PLAY button, and turn the search dial in the desired direction to adjust the playback speed. The range of speed adjustment is ± 15% in steps of 1%. (B) Hold down the PLAY button, and press the TRIM buttons to adjust the playback speed. The playback speed can be adjusted to ± 8% only. The SERVO indicator goes off. (Continued) 4-9 Chapter 4 Recording and Playback