Sony DVWM2000 Product Manual (Operation Manual 1st Edition (Revised 6)) - Page 51
Recording Procedure, To record an external time code without, modification
View all Sony DVWM2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Chapter 4 Recording and Playback To record an external time code without modification Using this method has no effect on the running of the internal time code generator. To record the playback time code from an external VTR, the method under the heading above, "To synchronize the internal time code generator to an external signal", is recommended. 4-1-3 Recording Procedure To record, use the following procedure. Z Z 1 23 TIME CODE IN OUT 2 1 1 Connect the time code output of the external time code generator to the TIME CODE IN connector. 2 Perform the following settings in function menu page 1: TCG (F1): EXT TCG (F2): PRESET 1 Insert a cassette. For details, see the section "Inserting a cassette" (page 3-10). 2 Hold down the REC button, and press the PLAY button. Recording starts, the servo locks, and the SERVO indicator lights. 3 To stop recording, press the STOP button. If you record to the end of the tape The tape is automatically rewound, and stops. It is possible to disable the automatic rewind function by changing the setting of setup menu item 125. 4-5 Chapter 4 Recording and Playback