Sony DVWM2000 Product Manual (Operation Manual 1st Edition (Revised 6)) - Page 137
Item number, Settings, MSTER, REMOV, THROU, DVW-M2000/M2000P
View all Sony DVWM2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Chapter 12 Setup Menus Menu items in the range 700 to 799, relating to video control (Continued) Item number Item name Settings 712 VIDEO PROCESS ON When the function menu item CAPSTN or menu item 106 is set to 2F for 2-field CAP LOCK 2FIELD playback, select whether or not to carry out a "picture shift". OFF : No picture shift ON: Carry out picture shift. Note To eliminate the adverse effect of the residual chrominance subcarrier component in the Y signal that is the result of the Y/C separation, this unit automatically applies a shift to the playback image in the H direction, so that even in 2-field playback a satisfactory image can be obtained. 713 VIDEO SETUP Set the video setup amounts to be removed from a recording signal and Betacam REFERENCE LEVEL playback signal, and to be added to a composite output signal. There are (DVW-M2000 only) independent settings for a recording signal (referred to below as an input signal), a Betacam signal, and a composite output signal (referred to below as an output signal). Notes Sub-Item • Setup removal is carried out only with respect to a Betacam format CAV input signal (menu setting) and NTSC composite input signal. It is not carried out with respect to other input signals. • The setup amounts specified in this menu item have no connection with the function menu item SETUP. 0 MASTER LEVEL When the input signal, Betacam playback signal, and output signal settings are "MSTER" (master), the setup amount specified for this sub-item is removed from the input signal and Betacam playback signal, and is added to the output signal. 0.0% ... 7.5% ... 10.0%: Setting in this range, in 0.5% increments. 1 INPUT LEVEL MSTER : Set the input signal to the master setting. 0.0% ... 7.5% ... 10.0%: Set the setup amount to be removed from the input signal in this range, in 0.5% increments. 2 INPUT VBLK CONT REMOV: Remove the setup amount in the vertical blanking interval of the input signal. THROU : Do not remove the setup amount in the vertical blanking interval of the input signal. 3 BETACAM PB LEVEL MSTER : Set the Betacam playback signal to the master setting. (DVW-M2000/M2000P) 0.0% ... 7.5% ... 10.0%: Set the setup amount to be removed from the Betacam playback signal in this range, in 0.5% increments. 4 OUTPUT LEVEL MSTER : Set the output signal to the master setting. 0.0% ... 7.5% ... 10.0%: Set the setup amount to be added to the output signal in this range, in 0.5% increments. (Continued) 12-23 Chapter 12 Setup Menus