Sony DVWM2000 Product Manual (Operation Manual 1st Edition (Revised 6)) - Page 112
Setting, Setting method, Manual setting, TOTAL, REMAIN, With the displayed setting flashing
View all Sony DVWM2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Chapter 11 Function Menu 11-2 Function Menu Item List Page 3 Item F1 (SYNC) F2 (SC) F3 (VIN LV) F4 (EMPHSS) F5 (T INFO) Setting Sets the output signal sync phase. Setting method With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust the output signal sync phase across the range ±15 µs relative to this unit's input reference signal. Adjust this item when you want to adjust the output signal sync phase precisely to match a reference signal, or when connecting this unit and other VTRs to a device such as a switcher to perform operations such as special effects editing. Sets the output signal subcarrier phase. Setting method With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust the output signal subcarrier phase across the range ±200 ns relative to this unit's input reference signal. Adjust this item when you are using composite signals in editing and want to adjust the output signal subcarrier phase precisely to match a reference signal. Even when this value is adjusted, the output SCH (subcarrier to sync) phase is maintained. Sets the level of composite video signals input to the COMPOSITE VIDEO INPUT connectors. AGC: Adjusts the level automatically. Manual setting: With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust the level of composite video signals input to the COMPOSITE VIDEO INPUT connectors. Specifies whether to add audio emphasis to analog audio input signals and Betacam/Betacam SP format playback audio signals. ON: Add audio emphasis. OFF: Do not add audio emphasis. Selects the type of time data to display in time data display area 2. TOTAL: Display total time. REMAIN: Display remaining time. 11-6 Chapter 11 Function Menu