TP-Link OC200 Omada Controller Software 4.1.5Windows/Linux User Guide - Page 110
Create, Setting, Transmission, Apply, Enable or disable certain types of ALG according to your
View all TP-Link OC200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Chapter 4 Source Port Destination IP Destination Port Protocol Configure the Network with Omada SDN Controller The gateway uses the Source Port to receive the traffic from the internet. Only the traffic which matches the Source Port and the Protocol is forwarded. The traffic is forwarded to the host of the Destination IP in the LAN. The traffic is forwarded to the Destination Port of the host in the LAN. Network traffic is transmitted using either TCP or UDP protocol. Only the traffic which matches the Source Port and the Protocol is forwarded. If you want both TCP traffic and UDP traffic to be forwarded, select All. 2. Click Create. The new Port Forwarding entry is added to the table. You can click to edit the entry. You can click to delete the entry. ■■ ALG Go to Setting > Transmission > NAT > ALG. Enable or disable certain types of ALG according to your needs and click Apply. FTP ALG FTP ALG allows the FTP server and client to transfer data using the FTP protocol in one of the following scenarios: •• The FTP server is in the LAN, while the FTP client is on the internet. •• The FTP server is on the internet, while the FTP client is in the LAN. •• The FTP server and FTP client are in different LANs. 108