TP-Link OC200 Omada Controller Software 4.1.5Windows/Linux User Guide - Page 275
Manage a Single Client, In Config, you can con the following parameters
View all TP-Link OC200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 275 highlights
Chapter 7 ■■ Manage a Single Client In Config, you can configure the following parameters: Monitor and Manage the Clients Alias Rate Limit Use Fixed IP Address Specify the client's alias to better identify different clients, and the alias is used as the client's username in the table on the Clients page. Click the chekbox to enable rate limit for the client. With the function enabled, you can further set limits for download and upload rate. If rate limit is disabled, the rate limit of the client remains its default setting. Note: Rate Limit on this page is only available for the clients connected to the EAPs. To limit the rate of the clients connected to the gateway or switch, go to Bandwidth Control page. Click the checkbox to configure a fixed IP address for the client. With this funciton enabled, select a network and specify an IP address for the client. To view and configure networks, refer to Configure Wired Networks. Note: An Omada-managed gateway is required for this function. Otherwise, you cannot set a fixed IP address for the client. 273