TP-Link OC200 Omada Controller Software 4.1.5Windows/Linux User Guide - Page 78

Chapter 4 Configure the Network with Omada SDN Controller 4. 4 Configure Wireless Networks Wireless networks enable your wireless clients to access the internet. Once you set up a wireless network, your EAPs typically broadcast the network name (SSID) in the air, through which your wireless clients connect to the wireless network and access the internet. A WLAN group is a combination of wireless networks. Configure each group so that you can flexibly apply these groups of wireless networks to different EAPs according to your needs. After setting up basic wireless networks, you can further configure WLAN Schedule, 802.11 Rate Control, and MAC Filter among other advanced settings. 4. 4. 1 Set Up Basic Wireless Networks Configuration To create, configure and apply wireless networks, follow these steps: 4 ) Create a WLAN group. 5 ) Create Wireless Networks 6 ) Apply the WLAN group to your EAPs Create a WLAN Group Create Wireless Networks Apply the WLAN Group Note: By default, there is a WLAN group named Default, which is applied to all EAPs. If you simply want to configure wireless networks for the default WLAN group and apply it to all your EAPs, skip this step. 3. Go to Settings > Wireless Networks to load the following page. 4. Select + Create New Group from the drop-down list of WLAN Group to load the following page. Enter a name to identify the WLAN group. 76