TP-Link OC200 Omada Controller Software 4.1.5Windows/Linux User Guide - Page 254
General, IP Settings Only for configuring a single device
![]() |
View all TP-Link OC200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 254 highlights
Chapter 6 Configure and Monitor Omada Managed Devices ■■ General In General, you can specify the device name and LED settings of the AP, and categorize it via device tags. Name LED Device Tags (Only for configuring a single device) Specify a name of the device. Select the way that device's LEDs work. Use Site Settings: The device's LED will work following the settings of the site. To view and modify the site settings, refer to Services. On/Off: The device's LED will keep on/off. Select a tag from the drop-down list or create a new tag to categorize the device. ■■ IP Settings (Only for configuring a single device) In IP Settings, select an IP mode and configure the parameters for the device. If you select DHCP as the mode, make sure there is a DHCP server in the network and then the device will obtain dynamic IP address from the DHCP server automatically. You can set a fallback IP 252
![](/manual_guide/products/tplink-omada-software-controller-omada-controller-software-415windowslinux-user-guide-e154318/254.png)