TP-Link OC200 Omada Controller Software 4.1.5Windows/Linux User Guide - Page 98
Configuring Gateway Rules, Settings, Network Security, URL Filtering, Apply
View all TP-Link OC200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Chapter 4 Configure the Network with Omada SDN Controller ■■ Configuring Gateway Rules 1. Go to Settings > Network Security > URL Filtering. Under the Gateway Rules tab, click to load the following page. 2. Define filtering criteria of the rule, including source and URLs, and determine whether to forward the matched packets. Refer to the following table to configure the required parameters and click Apply. Name Status Policy Source Type Enter a name to identify the URL Filtering rule. Click the checkbox to enable the URL Filtering rule. Select the action to be taken when a packet matches the rule. Deny: Discard the matched packet and the clients cannot access the URLs. Permit: Forward the matched packet and clients can access the URLs. Select the source of the packets to which this rule applies. Network: With Network selected, select the network you have created from the Network drop-down list. If no networks have been created, you can select the default network (LAN), or go to Settings > Wired Networks > LAN to create one. The gateway will filter the packets sourced from the selected network. IP Group: With IP Group selected, select the IP Group you have created from the IP Group drop-down list. If no IP Groups have been created, click +Create New IP Group on this page or go to Settings > Profiles > Groups to create one. The gateway will examine whether the source IP address of the packet is in the IP Group. 96