TP-Link OC200 Omada Controller Software 4.1.5Windows/Linux User Guide - Page 76
The new port profile is added to the profile list. You can click, edit the port profile. You can click
View all TP-Link OC200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Chapter 4 Configure the Network with Omada SDN Controller LLDP-MED Bandwidth Control Ingress Rate Limit Egress Rate Limit Broadcast Threshold Multicast Threshold UL-Frame Threshold Action Click the checkbox to enable LLDP-MED (Link Layer Discovery Protocol-Media Endpoint Discovery) for device discovery and auto-configuration of VoIP devices. Select the type of Bandwidth Control functions to control the traffic rate and traffic threshold on each port to ensure network performance. Off: Disable Bandwidth Control for the port. Rate Limit: Select Rate limit to limit the ingress/egress traffic rate on each port. With this function, the network bandwidth can be reasonably distributed and utilized. Storm Control: Select Storm Control to allow the switch to monitor broadcast frames, multicast frames and UL-frames (Unknown unicast frames) in the network. If the transmission rate of the frames exceeds the set rate, the frames will be automatically discarded to avoid network broadcast storm. When Rate Limit selected, click the checkbox and specify the upper rate limit for receiving packets on the port. When Rate Limit selected, click the checkbox and specify the upper rate limit for sending packets on the port. When Storm Control selected, click the checkbox and specify the upper rate limit for receiving broadcast frames. The broadcast traffic exceeding the limit will be processed according to the Action configurations. When Storm Control selected, click the checkbox and specify the upper rate limit for receiving multicast frames. The multicast traffic exceeding the limit will be processed according to the Action configurations. When Storm Control selected, click the checkbox and specify the upper rate limit for receiving unknown unicast frames. The traffic exceeding the limit will be processed according to the Action configurations.. When Storm Control selected, select the action that the switch will take when the traffic exceeds its corresponding limit. With Drop selected, the port will drop the subsequent frames when the traffic exceeds the limit. With Shutdown selected, the port will be shutdown when the traffic exceeds the limit. 3. Click Save. The new port profile is added to the profile list. You can click in the ACTION column to edit the port profile. You can click in the ACTION column to delete the port profile. 74