TP-Link OC200 Omada Controller Software 4.1.5Windows/Linux User Guide - Page 86

Chapter 4 4. 4. 3 WLAN Schedule Configure the Network with Omada SDN Controller Overview WLAN Schedule can turn on or off your wireless network in the specific time period as you desire. Configuration Go to Settings > Wireless Networks, click in the ACTION column of the wireless network which you want to configure, and click + WLAN Schedule to load the following page. Enable WLAN schedule and configure the parameters .Then click Apply. Action Time Range Radio On: Turn on your wireless network within the time range you set, and turn it off beyond the time range. Radio Off: Turn off your wireless network within the time range you set, and turn it on beyond the time range. Select the Time Range for the action to take effect. You can create a Time Range entry by clicking + Create New Time Range Entry from the drop-down list of Time Range. For details, refer to Create Profiles. 4. 4. 4 802.11 Rate Control Overview Note: 802.11 Rate Control is only available for certain devices. 802.11 Rate Control can improve performance for higher-density networks by disabling lower bit rates and only allowing the higher. However, 802.11 Rate Control might make some legacy devices incompatible with your networks, and limit the range of your wireless networks. Configuration Go to Settings > Wireless Networks, click in the ACTION column of the wireless network which you want to configure, and click + 802.11 Rate Control to load the following page. Select 2.4 GHz and/or 5 84