TP-Link OC200 Omada Controller Software 4.1.5Windows/Linux User Guide - Page 276

Chapter 7 Monitor and Manage the Clients Monitor and Manage Multiple Clients To manage multiple clients at the same time, click , select multiple clients, and click Edit Selected. Then you can configure the following parameters under the Config tab. Rate Limit IP Setting Keeping existing: The rate limit of the chosen clients remains their current settings. Enable: With Rate Limit enabled, specify limits for download and/or upload rate for all the chosen clients. Disable: With Rate Limit disabled, there is no rate limit for the chosen clients. Note: Rate Limit on this page is only available for the clients connected to the EAPs. To limit the rate of the clients connected to the gateway or switch, go to Bandwidth Control page. Keeping existing: The IP setting of the chosen clients remains their current settings. Use DHCP: The IP addresses of the clients is automatically assigned by the DHCP server, such as the Layer 3 switch and the gateway. Use Fixed IP Address: Select a network and assign fixed IP addresses to the chosen clients manually. To view and configure networks, refer to Configure Wired Networks. Note that an Omada-managed gateway is required for this function. Otherwise, you cannot set fixed IP addresses for the chosen clients. 274