TP-Link OC200 Omada Controller Software 4.1.5Windows/Linux User Guide - Page 60
Click, and con the following parameters. Then click, Primary DNS Server, QoS Tag
View all TP-Link OC200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Chapter 4 Configure the Network with Omada SDN Controller 2. Click + Advanced Settings and configure the following parameters. Then click Apply. Primary DNS Server / Secondary DNS Server Enter the IP address of the DNS server provided by your ISP if there is any. MTU Specify the MTU (Maximum Transmission Unit) of the WAN port. MTU is the maximum data unit transmitted in the physical network. When the connection type is Static IP, MTU can be set in the range of 576-1500 bytes. The default value is 1500. VLAN Add the WAN port to a VLAN and you need to specify the VLAN. Generally, you don't need to manually configure it unless required by your ISP. QoS Tag The QoS (Quality of Service) function helps to prioritize the internet traffic based on your needs. You can determine the priority level for the traffic by specifying the tag. The tag ranges from 1 to 7. None means the packet will be forwarded without any operation. QoS Tag is only available when VLAN is enabled. 58