TP-Link OC200 Omada Controller Software 4.1.5Windows/Linux User Guide - Page 238

Note that the mirroring ports and the member ports of LAG cannot be selected as mirrored, ports.

Page 238 highlights

Chapter 6 Configure and Monitor Omada Managed Devices Note that the mirroring ports and the member ports of LAG cannot be selected as mirrored ports. PoE Mode Link Speed Spanning Tree Ingress Rate Limit (Only for PoE ports) Select the PoE mode for the port. Off: Disable PoE on the PoE port. 802.3at/af: Enable PoE on the PoE port. Select the speed mode for the port. Auto: The port negotiates the speed and duplex automatically. Manual: Specify the speed and duplex from the drop-down list manually. Click the checkbox to enable Spanning Tree. It helps to ensure that you do not create loops when you have redundant paths in the network. To make sure Spanning Tree takes effect on the port, go to the Config tab and enable Spanning Tree on the switch. Click the checkbox and specify the upper rate limit for receiving packets on the port. With this function, the network bandwidth can be reasonably distributed and utilized. 236

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333

236
Chapter 6
Configure and Monitor Omada Managed Devices
Note that the mirroring ports and the member ports of LAG cannot be selected as mirrored
ports.
PoE Mode
(Only for PoE ports) Select the PoE mode for the port.
Off
: Disable PoE on the PoE port.
802.3at/af
: Enable PoE on the PoE port.
Link Speed
Select the speed mode for the port.
Auto
: The port negotiates the speed and duplex automatically.
Manual
: Specify the speed and duplex from the drop-down list manually.
Spanning Tree
Click the checkbox to enable Spanning Tree. It helps to ensure that you do not
create loops when you have redundant paths in the network.
To make sure Spanning Tree takes effect on the port, go to the
Config
tab and
enable Spanning Tree on the switch.
Ingress Rate Limit
Click the checkbox and specify the upper rate limit for receiving packets on the
port. With this function, the network bandwidth can be reasonably distributed
and utilized.