TP-Link OC200 Omada Controller Software 4.1.5Windows/Linux User Guide - Page 253
Con and Monitor EAPs, Con EAPs
View all TP-Link OC200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 253 highlights
Chapter 6 Configure and Monitor Omada Managed Devices 6. 4 Configure and Monitor EAPs In the Properties window, you can configure one or some EAPs connected to the controller and monitor the performance and statistics. Configurations changed in the Properties window will be applied only to the selected AP(s). By default, all configurations are synchronized with the current site. To open the Properties window, click the entry of an AP, or click the icon to select APs for batch configuration. A monitor panel and several tabs are listed in the Properties window. Most features to be configured are gathered in the Config tab, such as IP, radios, SSID, and VLAN, while other tabs are mainly used to monitor the device. Note: • The available functions in the window vary due to the model and status of the device. • In Batch Config, you can only configure the selected devices, and the unaltered configurations will keep the current settings. • In Batch Config, if some functions, such as the 5 GHz band, are available only on some selected EAPs, the corresponding configurations will not take effect. To configure them successfully, check the model of selected devices first. 6. 4. 1 Configure EAPs In the Properties window, click Config and then click the sections to configure the features applied to the selected AP(s), including the general settings, IP settings, Radios, SSIDs, VLAN, SNMP, and advanced functions. 251