TP-Link OC200 Omada Controller Software 4.1.5Windows/Linux User Guide - Page 120
Configuring Auto IPsec VPN, Configuring Site-to-Site VPN
View all TP-Link OC200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Chapter 4 Configure the Network with Omada SDN Controller Configuration To complete the VPN configuration, follow these steps: 3 ) Create a new VPN policy and select the purpose of the VPN according to your needs. Select Siteto-Site if you want the network connected to another. Select Client-to-Site if you want some hosts connected to the network. 4 ) Select the VPN tunneling protocol and configure the VPN policy based on the protocol. ■■ Configuring Site-to-Site VPN Omada managed gateway supports two types of Site-to-Site VPNs: Auto IPsec and Manual IPsec. • Configuring Auto IPsec VPN 4. Go to Settings > VPN. Click to load the following page. 5. Enter a name to identify the VPN policy and select the purpose as Site-to-Site VPN. Refer to the following table to configure the required parameters and click Create. Name Enter a name to identify the VPN policy. Purpose VPN Type Status Remote Site Select the purpose for the VPN as Site-to-Site VPN. Select the VPN type as Auto IPsec. Click the checkbox to enable the VPN policy. Select the site on the other end of the Auto IPsec VPN tunnel. Make sure that the selected remote site has an online Omada managed gateway within the same controller. 118