TP-Link OC200 Omada Controller Software 4.1.5Windows/Linux User Guide - Page 94
Bind the switch ACL to a switch port or a VLAN and click, Note that a switch ACL takes effect, only
View all TP-Link OC200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Chapter 4 Configure the Network with Omada SDN Controller IP-Port Group MAC Group Select the IP-Port Group you have created. If no IP-Port Groups have been created, click +Create on this page or go to Settings > Profiles > Groups to create one. The switch will examine whether the destination IP address and port number of the packet are in the IP-Port Group. Select the MAC Group you have created. If no MAC Groups have been created, click +Create on this page or go to Settings > Profiles > Groups to create one. The switch will examine whether the destination MAC address of the packet is in the MAC Group. 3. Bind the switch ACL to a switch port or a VLAN and click Apply. Note that a switch ACL takes effect only after it is bound to a port or VLAN. Binding Type Specify whether to bind the ACL to ports or a VLAN. Ports: Select All ports or Custom ports as the interfaces to be bound with the ACL. With All ports selected, the rule is applied to all ports of the switch. With Custom ports selected, the rule is applied to the selected ports of the switch. Click the ports from the Device List to select the binding ports. VLAN: Select a VLAN from the drop-down list as the interface to be bound with the ACL. If no VLANs have been created, you can select the default VLAN 1 (LAN), or go to Settings > Wired Networks > LAN to create one. 92