TP-Link OC200 Omada Controller Software 4.1.5Windows/Linux User Guide - Page 223

Chapter 6 Configure and Monitor Omada Managed Devices Click , select Batch Adopt, click the checkboxes of devices, and click Adopt Selected. If the selected devices are all in the Pending status, the controller will adopt then with the default username and password. If not, enter the username and password manually to adopt the devices. Click , select Batch Config, click the checkboxes of devices, and click Edit Selected. Then the Properties window appears. There are two tabs in the window: Devices and Config. In Devices, you can click to remove the device from the current batch configuration. In Config, all settings are Keep Existing by default. For detailed configurations, refer to the configuration of switches and EAPs. Click to select multiple devices and add them to the Properties window for batch monitoring and management. Click to minimize the Properties window to an icon. To reopen the minimized Properties window, click . Click to maximize the Properties window. You can also use the icon on pages other than the Devices page. Click to close the Properties window of the chosen device(s). Note that the unsaved configuration will be lost. The number on the lower-right shows the number of devices in the batch configuration. 221