TP-Link OC200 Omada Controller Software 4.1.5Windows/Linux User Guide - Page 237
Con a Mirroring Port, Mirroring, Apply, Remove Overrides
View all TP-Link OC200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 237 highlights
Chapter 6 Multicast Threshold UL-Frame Threshold Action Configure and Monitor Omada Managed Devices With Storm Control selected, click the checkbox and specify the upper rate limit for receiving multicast frames. The multicast traffic exceeding the limit will be processed according to the Action configurations. With Storm Control selected, click the checkbox and specify the upper rate limit for receiving unknown unicast frames. The traffic exceeding the limit will be processed according to the Action configurations. When Storm Control selected, select the action that the switch will take when the traffic exceeds its corresponding limit. Drop: With Drop selected, the port will drop the subsequent frames when the traffic exceeds the limit. Shutdown: With Shutdown selected, the port will be shutdown when the traffic exceeds the limit. • Configure a Mirroring Port If you select Mirroring as Operation, the edited port can be configured as a mirroring port. Specify other ports as the mirrored port, and the switch sends a copy of traffics passing through the mirrored port to the mirroring port. You can use mirroring to analyze network traffic and troubleshoot network problems. To configure Mirroring, select the mirrored port or LAG, specify the following parameters, and click Apply. To discard the modifications, click Remove Overrides and all profile configurations become the same as the applied profile. 235