TP-Link OC200 Omada Controller Software 4.1.5Windows/Linux User Guide - Page 308

Chapter 8 Monitor the Network ■■ Customize Map Click the following icons to add, edit, and select the map. After selecting a map, click and drag in the devices from the Devices list to place it on the map according to the actual locations. Click to add a map. In the pop-up window, enter the description and upload an image in the .jpg, .jpeg, .gif, .png, .bmp, .tiff format. Click to edit maps in the pop-up window. Click to edit the description of the map. Click to delete the map. Click to select a map from the drop-down list to place the devices. Hover your cursor over the device icon to view the basic information of it, including the device name, MAC address, IP address and connected clients. You can click the device icon to reveal additional action icons: Indicates that the device is unlocked and you can click it to lock the device in the current location. When unlocked, you can move the device on the map and click the action icons around it. Indicates that the device is locked on the map and you can only click the icon to unlock the device. Displays the device's Properties window. For detailed configuration and monitor in the Properties window, refer to Configure and Monitor Omada Managed Devices. Click to remove the selected device back into the Device list. (Only for connected switches and APs) Click to flash the LED of the device on the map. Then the LED will flash for 10 minutes or until the cancel button is clicked again. Click to stop the LED from flashing. 306