TP-Link OC200 Omada Controller Software 4.1.5Windows/Linux User Guide - Page 50
Configuration, Sites, Settings, Services
View all TP-Link OC200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Chapter 4 Configure the Network with Omada SDN Controller Configuration Select a site from the drop down list of Sites in the top-right corner, go to Settings > Site, and configure the following features for the current site in Services. Click Save. LED Automatic Upgrades Channel Limit Mesh Auto Failover Enable or disable LEDs of all devices in the site. By default, the device follows the LED setting of the site it belongs to. To change the LED setting for certain devices, refer to Configure and Monitor Omada Managed Devices. When enabled, the controller will automatically upgrade devices in this site to the latest version. (For Outdoor APs) When enabled, outdoor EAPs do not use the channel with the frequency ranging from 5150 MHz to 5350 MHz to meet the local laws and regulations limit in EU countries. (For EAP225/EAP245/EAP225-Outdoor) When enabled, EAPs supporting Mesh can establish the mesh network at the site. (For APs in the mesh network) Auto Failover is used to automatically maintain the mesh network. When enabled, the controller will automatically select a new wireless uplink for the AP if the original uplink fails. To enable this feature, enable Mesh first. 48